What can a 100 watt laser engraver be: The 100 watt laser machine is very useful when making hubs, but is also a favorite among hobbyists. You can use it to cut through many materials for your home laser engraving business.
But what exactly can a 100 watt laser engraver cut?
A 100-watt laser engraver cuts a thick piece of acrylic like a piece of butter. That is why it is often used in industries related to plastics manufacturing and wood industries. You can also use it to cut materials such as cardboard, leather, rubber and more. You need at least 300 watts to cut thin metals.
What can a 100 Watt laser engraver cut:
The list of materials that can be cut with a 100 watt laser engraver includes:
- Acrylic (3mm, 6mm, 12mm, 25mm).
- learn
- Cardboard
- Plastic that can be lasered
- Paper
- One eighth inch MDF
- Rubber Stamp
- Wood boards
What to Look for When Using a 100 Watt Laser engraver on Different Materials – What Can a 100 Watt Laser engraver can cut?
- When cutting acrylic, you may want to keep changing the speed of your machine for a fine and fast cut. Speed 15, for example, carves well on a 6mm acrylic sheet. But you need to reduce the speed to 1 for an inch of the material.
- It is very easy to scorch a sheet of paper with a 100 watt laser. So start increasing the speed to 400 and adjust it slowly until you get to your sweet spot
Can you cut with a 100 watt laser cutter?
Although we have found that the 100 watt laser machine is perfectly suited for laser cutting, you can also use it for laser engraving. The materials you can engrave on include;
- Acrylic
- Glass
- Aluminum that has been anodized
- ceramics
- learn
- Stone
- MDF
- Cardboard
- Rubber Stamp
- Foam
- Wood
- Marble and Granite
- Metal
- Plastic
To engrave with precision, make sure the lens is in focus. Always keep a transfer tape handy to avoid overheating or burning the material. A 100 watt laser cutter is quite powerful. Keep an eye on the speed of your machine at all times. It differs for different materials. Most engravers come with an owner’s manual that gives all of these details, so be sure to follow the instructions provided. For example, engraving a brick needs a speed of 35, while engraving a piece of plastic needs a speed of 400.
What are the advantages of laser cutters?
1. Precision – Multiple cutting methods are available. For example, thermal cutting. Even then, a laser cut is the standard. When you are trying to cut material such as fabric or a piece of leather with the finest accuracy, there is nothing finer than laser cutting.
The laser machine uses a powerful beam to locate and cut the material seamlessly. The tolerance scale ranges from 0.003mm to 0.006mm. A laser cut achieves an accuracy that is second to none.
2. Speed – An accurate laser cut can be achieved in an instant. No matter how challenging or complicated the design may seem; a laser cutter gets the job done quickly and efficiently.
3. Fits the budget – Yes, a laser engraver can cost tens of thousands of dollars, but if you’re just an enthusiast, you don’t need to buy an expensive one. In fact, there are many great engravers under $1000 that will get the job done.
4. No Damage – There is often a misconception that a laser cut can damage the material, especially if it is thin. But the truth is that a lasercut is not only sharp, but also neat and affordable. It does not deform the surfaces of any material. In fact, the beam is incredibly powerful and cuts through the material in the blink of an eye. So you don’t have to worry about damage and deformation of your material.
5. Low Power Consumption – A laser cutting machine uses very little electricity to operate. On the other hand, old and traditional cutting tools consume a lot of power. A laser cutter uses less than 10 kW of energy.
6. Maximum Use and Minimum Waste – Precision in work is one of the main selling points of a laser cutting machine. A laser cut is just right and does not damage the material. So you can work on a large project without wasting a lot of material through damage, as would be the case with other cutting options. In addition, in addition to cutting, the laser cutter can also be used for many different functions. You can use it to engrave, emboss and even drill through your material to achieve your desired artistic design.
Final Thoughts
Traditional cutting methods such as thermal and water jet may still be used, but they are messy, expensive and too complex. However, cutting with a laser is fast, cheap, efficient and fun too. And as we’ve established, you can use a 100 watt laser machine on a lot of different materials. Best of all, you don’t have to be a professional to work with a laser machine – just install it according to your owner’s manual and you’re good to go!
